Model
Laser Cut (1,0mm thick Wood)
temporarily out of stock
Groundwork& Diorama Accessories:
Fredericus Rex (Germany) Diorama Accessories:
Wrought Iron & Wood Fencing
Go to Fredericus Rex Diorama Accessories Index Page->
< go back to Fredericus Rex groundwork products index page
Laser cut paper sets to create the most realistic wrought iron & wood fences
|
Model |
Description | Price | Photo |
| FR GL079 | Iron Fence Scale 1:35. Includes 2 pieces of Iron Fence & 2 gate`s, 1:35 scale (also compatible with 54 mm scale) laser cut paper set. Fence - Height: 40mm, Width: 93mm. Fence gate - Height 40mm graduating to 49 mm, Width 32 mm. Photo on bottom shows 54-mm scale figure (not included) next to fence to illustrate size. | $12.99
|
|
| FR GL076 | Iron Fence 1:35 scale, (also compatible with 54 mm scale) laser cut paper set. Includes 2 fences, each 65 mm height by 95 mm width. Contains two wrought iron fences. Also includes the stabilizers (middle photo on right) linkages from front & rear (adds stability). Photo on bottom shows 54-mm scale figure (not included) next to fence to illustrate size. Laser cut paper kit. | $12.99
|
|
| FR GL077 | Stone Pillar (80 mm high by 20 mm wide) compatible with 1/35 scale & 54 mm, works ideally with wrought iron fence above (as depicted in bottom photo). | $5.99
|
|
| FR GL090 | Wood fence include 1 gate, 2 Door hinges and 2 door angle , Scale 1:35. Laser Cut (1,0mm thick Wood） 36 mm height. | $9.99
|
|
| FR GL093 | Wooden fence scale 1/32 - 1/35. Laser cut wooden sheets with very fine grain detail. This is a clean looking fence with nail detail throughout. All planks have the same width and have pointed tops. The fence is 8cm wide and 5,9 cm high. A few washes and dry brushing will make this fence look very realistic. Or you could paint the fence in any colour you like and chip of the paint in random places to let the natural wood show through. Laser Cut (1,0mm thick Wood | $6.99
|
|
| FR GL095 | Wooden fence Scale 1/32 - 1/35. Laser cut wooden
sheets with very fine grain detail. This is a clean looking fence
with nail detail throughout. All planks have the same width and have
pointed tops. The fence is 8cm wide and 5,9 cm high. A few washes and dry
brushing will make this fence look very realistic. Or you could paint the
fence in any colour you like and chip of the paint in random places to let
the natural wood show through. Laser Cut (1,0mm thick Wood) |
$6.99
|
|
| FR GL097 | Wooden fence with engraved grain scale 1/32 - 1/35. Laser cut wooden sheets with very fine engraved grain detail. This is a clean looking fence with nail detail throughout. All planks have the same width and have pointed tops. The fence is 8,0cm wide and 6,0 cm high. A few washes and dry brushing will make this fence look very realistic. Or you could paint the fence in any colour you like and chip of the paint in random places to let the natural wood show through. Laser Cut (1,0mm thick Wood) | $8.99
|
|
| FR GL098 | Wooden fence with engraved grain scale 1/32 -
1/35. Laser cut wooden sheets with very fine engraved grain
detail. This is a clean looking fence with nail detail throughout.
All planks have the same width and have pointed tops. The fence is 8,0cm
wide and 6,0 cm high. A few washes and dry brushing will make this fence
look very realistic. Or you could paint the fence in any colour you like
and chip of the paint in random places to let the natural wood show
through. Laser Cut (1,0mm thick Wood) temporarily out of stock |
$8.99
|
|
Go to Fredericus Rex Diorama Accessories Index Page->
< go back to Fredericus Rex groundwork products index page
Back to Groundwork & Diorama Aids Index