Sar9 Workbench...
.
Below shows how to remove 
the front sight for Night Sight 
installation. As always first 
verify the firearm is empty.
.
.Night Sights are available at
 SarUSA and Night Fision.
.

Tools needed: Vice, small Crescent 
Wrench, a quality 5mm 1/4" drive 
socket with its opening flattened.
.

.
.

Secure the Crescent Wrench 
in a vice. Secure the front 
sight in the Crescent wrench.
.

.
Position the 5mm socket
evenly on the front sight 
bolt. Turn the socket driver 
to loosen the bolt while 
pushing slightly-tensioning 
the slide away from you.
.
Although the above method
works most of the time 
some front and rear sight 
screws may be too tight. 
Use heat, penetrating oil, etc.
.
More Sar 9 Improvements
coming soon.
.

Budget Builds
..
Installation Basics
 ..
National Match Shim
..
Gun Store 9 Packs 
..
AR15AccuShim
.
Feedback
..
Questions
.
 WD Home